Name: FlyWoo GOKU GN 745 45A AIO 32bit (MPU6000 ) V3
SKU: FW19003222
Availability: InStock

FlyWoo GOKU GN 745 45A AIO 32bit (MPU6000 ) V3

349.99 AED

3 in stock

Purchase & earn 350 points!

SKU: FW19003222 Categories: ESC & FC, Stack Tower

FlyWoo GOKU GN 745 45A AIO 32bit (MPU6000 ) V3

Product Description

Since its launch, the GOKU GN745 AIO has stood as Flywoo’s top-tier AIO product, earning widespread acclaim from Betaflight, INAV, and Ardupilot enthusiasts. Now, we’re excited to introduce the latest upgrade in this series—the V3 version! The V3 boasts a new ESC two-in-one drive solution, enhancing the continuous current capacity to 45A and improving the overcurrent protection capability of the motor pads, resulting in a more powerful overall performance. Furthermore, the V3 version significantly advances in terms of convenience, featuring 4 new direct-plug Uart ports and adopting a Type-C interface for easier connectivity.

Highlights：

Performance: Utilizes STM32F745 chip, AM32 firmware, and MPU6000 gyro, with dual BEC, barometer, black box, supports 7 serial ports and I2C.
Plug & Play: Compatible with O3 air unit, GPS, Camera, Analog VTX, and Receiver without the need for soldering.
Type-C Interface: Features a Type-C interface for improved compatibility and easier connection.
Compatibility: Supports BF, INAV, and Ardupilot platforms.
New Layout: New ESC two-in-one drive solution, with a continuous current up to 45A.
Better Protection: Larger motor pad area with improved overcurrent protection.

	GOKU GN745 45A AIO 32bit (MPU6000 ) V3	GOKU GN745 45A AIO 32bit (MPU6000 ) V1.2
Firmware:	STM32F745 BGA	STM32F745 BGA
Continuous Current:	45A-50A MAX	40A-45A MAX
BEC:	5V 2A	5V 2A/9V 2A
ESC	32bit	32bit
Flash:	1MB	1MB
Black Box	16mb	16mb
Barometer:	DPS310/SPL06	DPS310/SPL06
Gyro:	MPU6000	MPU6000
Motor:	M1-M4 OUTPUT I2C: SCL/SDA	M1-M4 OUTPUT I2C: SCL/SDA
Uarts:	1,2,3,4,5,6,7	1,2,3,4,5,6
Plug Uart ports	YES
connector：	Type-C	Micro
OSD:	AT7456E	AT7456E
Hole:	25.5*25.5-3mm	25.5*25.5-3mm
Size:	33.5×33.5mm	33.5×33.5mm
Weight:	9.4g	8.5g

Specifications：

BF Flight Controller Firmware: FLYWOOF745AIO
INAV Firmware: FLYWOOF745
Ardupilot Firmware: FLYWOOF745
MCU: STM32F745 32-bit processor,216MHz, 1MB Flash
IMU: MPU6000 (SPI)
Barometer: SPL06
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
7 hardware UARTS (UART1,2,3,4,5,6,7)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
PPM and PWM receivers are not supported.
Onbord 16Mbytes for Blackbox logging
5V Power Out: 2.0A max
3.3V Power Out: 0.5A max
Dimensions: 33.5×33.5mm
Mounting Holes: Standard 25.5/26.5mm square to center of holes
Weight: 9.4g

Onboard 4in1 ESC

Support AM32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600,Dshot1200
Input Voltage: 2-6S Lipo
Continuous Current: 45A
Firmware: GOKU_F4A32_PRO

In the Box

1x UNICON UPL Capacitor 25V 470UF
4x M2x6.6 Shock-Absoring Ball
4x M2 Rubber Ring
1x XT30 Power Cable
1x DJI O3 Connection Cable
1x VTX & Camera Connection Cable
1x Receiver Connection Cable
1x GPS Compass Connection Cable

For More Stack Options Click

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.