Waller Balance : 0.00 AED
Sold out
iFlight BLITZ Mini F7 V1.1 Flight Controller
239.99 AED
Out of stock
Description
iFlight BLITZ Mini F7 V1.1 Flight Controller
Features :
Improved circuit design, better components and lower electrical noise!
DJI HD VTX Connector (Plug-and-Play / No soldering required)
FC indicator LEDs for visual debugging
iFlight BLITZ Mini F7 V1.1 Flight Controller Specifications :
MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456
Flash: 16MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 20×20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
Dimensions: 30.5×27 mm
Weight: 5g
Wiring Suggestion :
UART 1 for VTX HD / Analog
UART 2 for a Receiver
UART 3/4/5 for GPS or other sensors that require a serial port
UART 6 for ESC Telemetry
Packing List :
1 x BLITZ Mini F7 V1.1 Flight Controller
1 x FC connectors
1 x Silicon grommets
For More Options Click
Additional information
| Weight | 0.050 kg |
|---|
Brand
Brand
iFlight
You may also like…
Related products
GepRC GEP-F722-45A AIO V2
- Model Name: GEP-F722-45A AIO V2
- MCU: STM32F722
- IMU: 42688 gyro/accelerometer(SPI)
- OSD: Betaflight OSD w/ AT7456Ev
- UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
- BEC output: 5V@1A
- Intergrated LC Filter
- ESC MCU: 8BB21F16G
- Continuous current: 45A
- Input: 2~6S
- Support: Dshot600,Oneshot,Multishot
- Size: 32x32mm Board
- Mounting Hole: 25.5×25.5mm
- Weight: 8.8g
- Compatible With : GepRC Cinelog 35
